Edimax 5dBi Indoor Antenna - 1m Cable
This indoor omni antenna increase wireless signal range 50% and more over a distance of up to 40 meter. This omni antenna has RP*, SMA** and a TNC *** Connectors. The antenna complies with 802.11a/b/g Wireless LAN for reduced “dead-spots”. The direct contact to AP/Router ensures no cable loss, pure gain performance. The antenna base includes 1 meter pigtail to connect to the PC or AP. The antenna base for PC/AP re-location to pick up the best link quality. The magnetic design of the EA-IO5D, allows you to position the antenna on office partitions with a metal structures.
Specifications:
Wireless LAN Model NO.ED-IO5D
Frequency Range 2.4 GHz -2.5GHz ;
4900MHz –5875MHz Gain5 dBi at 11b/g ;
7dBi at 11aVSWR2.0 : 1 Max Impedance 50 Ohms
Power Handling2 W (cw)
Dimension 219 x 23 x 14 mm (w/o antenna base)
Weight 30 g (w/o antenna base)
Antenna base cableGDC-101B (Black);
Length: 1M Antenna Interface RP* SMA** Plug
*An RF connector is an electrical connector designed to work at radio frequencies in the multi-megahertz range. RF connectors are typically used with coaxial cables and are designed to maintain the shielding that the coaxial design offers.
**The SMA connector consists of a 0.250x36 thread. The male is equipped with a .312 inch hex nut.
***The TNC (threaded Neill-Concelman) connector is a threaded version of the BNC connector. The connector has a 50 Ω impedance and operates best in the 0–11 GHz frequency spectrum. It has better performance than the BNC connector at microwave frequencies. Invented in the late 1950s and named after Paul Neill of Bell Labs and Carl Concelman of Amphenol, the TNC connector has been employed in a wide range of radio and wired applications.